15th conference, Madrid, May 2013

Comparison of the IFDM building downwash model predictions with field data

Unified model intercomparisons for volcanic ash transport modeling

Qualified datasets for benchmarking local-scale emergency response models for the purpose of disaster management

Evaluation of different gas phase chemical mechanisms against smog chamber experimental data

Model evaluation and tracer experiment uncertainties

The Fukushima daiiChi power plant accident: A case study for model evaluation and sensitivity simulations at local scale

CERESTM CBRN - a unified modelling and decision support system to assess the dispersal and health impact of hazardous releases in urban or open-field environments

Reformulation of plume spread for near-surface dispersion

Convective boundary evolution in urban area situated in a complex terrain - evaluation of mesoscale model profiles against radiosounding data

Comparison of spatial rainfall data calculated with a meteorological model and from meaurements - implications for estimation of wet deposition with the FRAME model

Improving the low-wind performance of the AERMOD atmospheric dispersion model for predicting short-range impacts of livestock ammonia emissions

Receptor modeling for source apportionment of particle bounded polycyclic aromatic hydrocarbons at an urban location in Spain

Background air pollution prediction over Slovenia by Qualearia modelling system - preliminary validation

Reduction and emulation of ADMS urban

Evaluation of the wrf meteorological model results for high ozone episode in SW Poland - the role of model initial conditions

Spatial representativeness of air quality monitoring stations in Italy

Sensitivity analysis on PM traffic emission modeling parameters

Road source model intercomparison study using new and existing datasets

Validation of a geostatistical interpolation model using measurement of particulate matter concentration

Validation of Gaussian models using wind tunnel experiments and numerical simulation

Stack configuration and meteorological influences on the simulation of a large power plant plume

Study of the urban heat island in Lecce (Italy) by means of ADMS and ENVI-MET

Evaluation of the open road source model oml-highway for several field datasets

Experiences using the Delta tool for model quality assurance

CODASC: a database for the validation of street canyon dispersion models

Revisiting 1992 HARMO1 (RISO) comments on limitations of short range atmospheric dispersion models

Numerical error quantification of RANS modelling in an idealized central European city centre

Evaluation of ALADIN-CAMX and WRF/CHEM operational air quality forecasts: first results

Influence of horizontal grid resolution on air quality modelling systems in Barcelona metropolitan area (Spain)

MYAIR toolkit for model evaluation

Further afield transport of spray drift using a coupling approach

Regional air quality forecasting for the Czech republic

Sensitivity study of the impact of meteorological input parameters on atmospheric dispersion estimates

Screening tools for data quality and outlier detection applied to the Airbase ambient air pollution database

Evaluation of detection abilities of monitoring networks using different assessment criteria

Calculation of the far range atmospheric transport of radionuclides after the Fukushima accident with the atmospheric dispersion model match of the nuclear emergency response system JRODOS using the freely available NWP data

High resolution maps of Nitrogen Dioxide for the province of Styria, Austria

Dispersion modelling for decision-making: combining spatial statistics with model parameterisation

A congestion sensitive approach to modelling road networks for air quality management

Impacts on air quality from EU-ETS and IPPC implementation in Romanian iron&steel plants

Determination of the role of modeling in the selected odour emissions sources impact assessement

Modelling PM10 dispersion from road traffic and industry in Ljubljana basin

Application of a Lagrangian particle model to the source apportionment for primary macropollutants in Taranto area (South Italy)

Air quality influence of ammonia and nitrogen oxides emissions reduction over the Po valley

BAP impact assesment using a modified version of CMAQ model over Zaragoza (Spain)

Impact of short rotation cropping s for bioenergy on isoprene emission in Germany

Evaluation of CFD simulations predicting diffuse sources emission dispersion: comparison between large eddy simulations (LES) and regulatory models

Regional air quality management assessment by using CHIMERE air quality model

Estimation of ambient air levels of regulated heavy metals by means of partial least squares regression (PLSR)

A case study: dispersion of Nitrogen Oxides in the vicinty of the Plabutsch tunnel portal in Graz

Local PM10 source apportionment for non-attainment areas in Slovakia

High quality air pollution dispersion modelling using high computational performance Lagrangian particle model

Spatial representativeness of rural background monitoring stations in Spain

The multi-scale character of air pollution: impact of local measures in relation to European and regional policies - a case study in Antwerp, Belgium

Air quality modelling as a supplementary assessment method in the framework of the European Air Quality Directive

PRTRVAL: A software tool for the validation of European pollutant release and transfer register emissions data

The impact of Eu Sulphur Directive on the emissions of ships

Combining different methodologies for source apportionment of particulate matter in Cyprus

Modelling activities for the development of air quality plans in Madrid (Spain)

ROMAIR: implementation of an air quality modeling and forecasting system in Romania

Development and implementation of an air quality integrated assessment model for the Iberian Peninsula

Spatial representativeness of air quality samples at hot spots

The Saharan sand episode on 12th of April 2002 in the northern Adriatic area, Croatia

Modelling wet deposition with high resolution precipitation data

Does the NAO index affect the precipitation amount and chemistry in the North-Eastern Iberian peninsula?

Spatial and chemical patterns of PM2.5 - a case study for the United Kingdom and Poland

High resolution climate change and air quality modelling for policy support over Belgium

Some statistical evaluations of numerically obtained atmospheric composition fields in Bulgaria

Analysis of the integrated environmental and meteorological forecasting and alert system (SIAM) for air quality applications over different regions on the Iberian Peninsula

Changes in air quality of Europe between 1990 and 2020: a modeling study

Aircraft observations and model simulations of concentration and particle size distribution in the Eyjafjallajökull volcanic ash cloud

Uncertainty factors in modelling dispersion of smoke from wild fires in a Mediterranean area

Air-quality changes induced by urban land surface forcing in central Europe

Air-quality and climate interaction within urban environment

Sensitivity anlysis of fire behaviour simulations over spain wth WRF-FIRE

Evaluation of the HIRLAM and HARMONIE numerical weather prediction models during an air pollution episode

Road transport emissions and the effect of dieselization of passenger cars on the air quality of the greater Athens area (GAA), Greece

Mesoscale simulation of hot weather events during augUst 2012 in Greece

Operational validation of SILAM model in differently inhabited areas

Evaluation of the PRESAXIO air quality forecasting system: PBL schemes WRF comparison and air quality modeling validation

Experimental modelling of flows over various idealized urban roughness elements

Performance of a new urban land-surface scheme in an operational mesoscale model for flow and dispersion

Large-eddy simulation of wind flows and pollutant transport inside and over idealized urban street canyons in unstable thermal stratification

Street canyon ventilation and pollution dispersion modelling

Producing annual statistics with microscale models for policy support : a number of test cases in Antwerp

Improving local air quality: to tree or not to tree?

Microscale flow simulations over urban configurations including thermal effects

On the flows over two-dimensional idealized street canyons with height variation

The impact of roadside barriers on near-road concentrations of traffic related pollutants

Extension and modification of the bulk Richardson number method for parameterization of exchange and interaction processes over urban areas

Validating the rio-IFDM-street canyon coupling over antwerp, Belgium

Large eddy simulation of pollution dispersion from highways with noise barriers

Enhanced “urban breathability” leads to deterioration in ground-level air-quality

On the role of the roughness length in urban boundary layers

Application of detached eddy simulation to neighborhood scale atmospheric dispersion

Numerical simulations of stratified turbulent flow with usage of high order schemes WENO and ILES

Development and application of a subgrid urban surface scheme over a wide metropolitan area in a limited area model

From local-scale to micro-scale assessment of the atmospheric impact of the pollutant plume emitted from a power-plant stack

Numerical simulations of pollutant dispersion in the centre of a European city for different thermal transfer conditions

Multi scale build-up area integration in parallel SWIFT

Adaptation of the Reynolds stress turbulence model for atmospheric simulations

Chemical reactions at street scale using a Lagrangian particle dispersion model (LPDM)

Offline approach for higher order concentration moments

On the effects of sampling duration on turbulence modeling and its application in atmospheric CFD simulations

On the relative importance of vegetation terms in computational fluid dynamics on flow and dispersion in the urban environment

Does electric vehicle introduction in the car fleet improve the air quality?

Influence of roadside vegetation barriers on concentrations of traffic-spewed ultrafine particles

AIRCITY: a very high-resolution 3d atmospheric dispersion modeling system for Paris.

Number concentration, distribution and transformation of nanoparticles in and outside a car cabin

Modelling of the atmospheric dispersion of radionuclides from the uranium processing facilities of the former Pridneprovsky chemical plant in Ukraine

An integrated approach between dispersion models and air quality data for air pollution exposure assessment purposes

The use of probabilistic plume predictions for the consequence assessment of atmospheric releases of hazardous materials

Comparison of hazard area and casualty predictions of a small-scale chemical attack using various toxic load toxicity models

H15-101 estimating odour impact range of selected wastewater treatment plant for winter and summer seasons in Polish conditions using Calpuff model

Assessment of separation distances to avoid odour annoyance: interaction between odour impact criteria and peak-to-mean factors

Contribution of emissions sources from shipping in the port area of Brindisi, Italy

Children exposure to traffic-related pollution: assessment of a typical schoolday

Operational short term health impact assesment of air pollution modelling system over Europe

Source identification of regional PM10 concentrations during episodes of air pollution in Eastern European area

Reconstructing the height of an elevated point release in low wind stable conditions

Adaptive Bayesian algorithms for the estimation of source term in a complex atmospheric release

Estimation of source term by inverse model in emergency with environmental monitoring and atmospheric dispersion in Korea nuclear power plant

Parameter study with the atmospheric dispersion model ADPIC

Application of a source-receptor model to determine source areas of pollen in Catalonia (NE SPAIN)

Application of atmospheric transport models at the new atmospheric Ebre Delta station (CLIMADAT network) in Eastern Spain

Using gamma dose rate monitoring with inverse modeling techniques to estimate the atmospheric release of a nuclear power plant accident: application to the Fukushima case

Re-construction of CH4 emissions from a biogas plant - meteorological aspects

Combined use of an inverse dispersion technique and a monte-carlo model to complete the H2S emission flow rates of a wastewater treatment plant

Estimation of the Cesium-137 source term from the Fukushima Daiichi nuclear power plant using air concentration and deposition data

Particulate source apportionment using two chemical transport models over French South Eastern coastal area

Pollutant source identification in a city district by means of a street network inverse model

Modelling of polycyclic aromatic hydrocarbons from selected point and area sources in central Europe

Inverting time dependent concentration signals to estimate pollutant emissions in case of accidental or deliberate release

A trajectory statistical method for the identification of sources associated with concentration peak events

Uncertainty treatment in dispersion modelling of accidental releases

Dispersion model validation illustrating the importance of the source term in hazard assessments from explosive releases

A preliminary analysis of measurements from a near-field pollutants dispersion campaign in a stratified surface layer

Improved scheme for parametrization of convective transport in NAME III

A model for buoyant puff dispersion in urban areas

Meteorological forecast and dispersion of noxious agents in the urban environment - application of a modelling chain in real-time to a fictitious event in Paris city

Development and application of Retro-SPRAY, a backward atmospheric transport and dispersion model at the regional and urban scale

CFD analysis for risk analysis in urban environments - Tilburg city case study

Effect of wind fluctuations on near-range atmospheric dispersion under different types of thermal stratification

Air pollution prediction and doses calculation in case of nucleary emergency at Krsko NPP

A Lagrangian stochastic model for estimating the high order statistics of a fluctuating plume in the neutral boundary layer

Future radiological dispersion calculations in Switzerland with JRODOS and LASAT

The EFFIS forest fire emission model: application to a major fire event in Portugal

Atmospheric dispersion modeling for the Fukushima nuclear accident

Numerical analysis for 137CS on seabed sediment including atmospheric deposition near the Fukushima coastal area

PLUIMRADAR: A fast user friendly web-based dispersion tool for emergency response

Large-eddy simulation of flow and dispersion in an heterogeneous urban area: comparison with field data

Pollutant concentration fluctuations in a neutral atmospheric boundary layer: a new detailed data set for the validation of dispersion models

Harmonization of practices for atmospheric dispersion modelling within the framework of risk assessment

Modelling of fluctuating concentration fields in complex industrial areas

COST action ES1006. evaluation, improvement and guidance for the use of local-scale emergency prediction and response tools for airborne hazards in built environments.

Simulation database for atmospheric dispersion of pollutant and toxic compounds during accidental fires

Numerical simulation of hazardous material atmospheric dispersion following an accidental release in an industrial site: the effects of atmospheric chemistry during dispersion

Plume rise and spreading in buoyant releases in the atmosphere: reduced scale experiments and stochastic modelling

Chlorine and anhydrous ammonia concentrations observed and simulated in the Jack Rabbit field experiment, for releases of 1 or 2 tons in a 30 to 60 second period

New Lagrangian approach for wet plume modelling

Sensitivity analysis of the modelled deposition of 137CS on the Japanese land following the Fukushima accident: preliminary results

Atmospheric dispersion and individual exposure of hazardous materials. validation and intercomparison studies.

Effects of released hazardous gases (EFRHA) model: development and validation

CFD simulation of inverse plumes for identifying a stationary point source in low wind stable conditions